Open Monday Through Friday 8:00 A.M. to 5 P.M. Call 720-573-0327
Over time you may need a sign engineering letter to certify that your signage meets structural, wind, and local code […]
Sign engineering letter – what is a sign engineering letter and when is it needed? Read Post »
You find halo lit signs are backlit channel letters or panels where LEDs shine from behind, creating a soft, even
Halo lit signs – what are halo lit signs and when are they best? Read Post »
Just evaluating Led cabinet signs, you should weigh clear benefits-low energy use, long lifespan, high visibility and flexible color/brightness control-against
Led cabinet signs – what are the pros and cons of led cabinet signs? Read Post »
It’s necessary to obtain an electrical permit when you install, replace, alter or reconnect any illuminated or electrically powered sign
Electrical permit for signs – when do you need an electrical permit for signs? Read Post »
Just because your LED sign flickers doesn’t mean it’s irreparable; you can methodically troubleshoot by inspecting power supplies and wiring,
Led sign flickering – how do you troubleshoot led sign flickering issues? Read Post »
Signage projects are frequently denied for reasons such as zoning violations, size or placement noncompliance, improper materials or illumination, lacking
Many sign permit timelines begin when you submit plans and can vary by jurisdiction; typical steps include plan review, corrections,
Sign permit timeline – what is the typical sign permit timeline? Read Post »
Sign visibility at night depends on effective lighting and maintenance; you can boost brightness by choosing high-efficiency LEDs, proper driver
Sign brightness at night – how do you improve sign brightness at night? Read Post »
It’s vital that you choose a power supply matching your LED sign’s voltage and wattage, with at least 10-20% headroom
Led sign power supply – what should you know about choosing an led sign power supply? Read Post »
With a typical channel letter installation, you should plan for your site evaluation and permitting (1-2 weeks), fabrication (2-3 weeks),
Channel letter install timeline – what is the typical channel letter install timeline? Read Post »
Over the course of planning your storefront, you must verify whether channel letter sign permits are required by your municipality,
Channel letter sign permits – when are channel letter sign permits required? Read Post »
Weather in winter can slow sign installation and force changes to your schedule, materials, and methods; frozen ground complicates footing
checklist: on install day you should verify permits and site plans, confirm equipment and hardware, inspect your sign for damage,
Sign install day checklist – what should be on your sign install day checklist? Read Post »
Signage installation typically follows a predictable sequence: site survey and permits (1-3 weeks), design and fabrication (2-6 weeks), and on-site
Sign installation timeline – what is the typical sign installation timeline? Read Post »
There’s a range of factors that determine how long your LED modules last in illuminated signs: heat and thermal management,
Led modules lifespan – what affects led modules lifespan in illuminated signs? Read Post »
Most business owners find that blade signs boost your storefront visibility to pedestrians by projecting perpendicular to the building, while
How do blade signs compare with wall signs? Read Post »
Many property owners, like you, face municipal regulations for monument sign permits and should know the basic steps: verifying zoning,
Monument sign permit – what are monument sign permit basics? Read Post »
Many LED sign failures stem from predictable sources – poor power supply regulation, inadequate heat management, moisture ingress, faulty LED
Led sign failure causes – what are the most common led sign failure causes? Read Post »
It’s best to select channel letters that maximize legibility, durability, and compliance for medical settings: choose front-lit or halo-lit LED
Installation of channel letters starts with your site survey and permitting; you then create accurate templates, plan secure mounting and
Channel letters installation – what are the steps for channel letters installation? Read Post »
‘Signage that stands out uses high-quality face-lit, reverse-lit (halo), or combination channel letters with durable aluminum returns, UV-stable acrylic faces,
Just prioritize visibility and brand fidelity when selecting channel letters for your restaurant: face-lit and halo-lit LED channel letters deliver
Channel letters for restaurants – what channel letters for restaurants work best? Read Post »
Installation of raceways is the process of fitting channels, conduits, or cable trays to route, secure and protect electrical and
Raceway installation – what is raceway installation and when is it used? Read Post »
Overall, landlord approval signage governs use and placement on private property based on your lease and the property owner’s preferences,
Just use simple math-multiply your sign’s watts by daily hours, divide by 1,000, then multiply by your electricity rate-to estimate
Led sign energy cost – what is the real led sign energy cost for businesses? Read Post »
Over the course of planning your pylon sign, you need to understand permit categories, zoning restrictions, application procedures, required documentation,
Pylon sign permit – what are pylon sign permit basics? Read Post »